| …auto-bw timers
|
[frequency 1-604800 seconds]
|
300 seconds
|
Determines how often tunnel bandwidth is polled for all interfaces with auto bandwidth enabled.
|
| …link-management timers bandwidth-hold
|
1-300 seconds
|
15 seconds
|
Determines how long bandwidth requested in a Path message is set aside in anticipation of the Resv message.
|
| …link-management timers periodic-flooding
|
0-3600 seconds
|
180 seconds
|
Determines how often unflooded changed link information is flooded.
|
| …logging lsp
|
[path-errors | preemption | reservation-errors | setups | teardowns] {1-199 ACL | 1300-2690 ACL}
|
Disabled
|
Enables logging of various LSP-related events.
|
| …logging tunnel lsp-selection
|
[1-199 ACL | 1300-2690 ACL]
|
Disabled
|
Enables the logging of LSP selection events on TE tunnels—when a TE tunnel goes up and down, and which path option was used.
|
| …path-selection metric
|
{igp | te}
|
TE
|
Tells all tunnels on a headend to use either the IGP metric or the TE metric for path selection.
|
| …path-selection overload allow
|
{head | middle | tail}
|
Disabled
|
Allows PCALC to use nodes signalled as overloaded in the path calculation for an LSP.
|
| …reoptimize events link-up
|
None
|
Disabled
|
With this enabled, try to reoptimize all TE tunnels on a box whenever a link comes up in the network.
|
| …reoptimize timers frequency
|
0-604800 seconds
|
3600 seconds
|
Determines how often to reoptimize each up tunnel to see if there's a better path it could take. Setting a time of 0 disables reoptimization.
|
| …signalling advertise implicit-null
|
{1-99 ACL}
|
Disabled
|
Advertises implicit null rather than explicit null for any tunnels for which this router is a tail.
|
| …signalling interpret explicit-null verbatim
|
None
|
Disabled
|
Controls whether a received explicit null signaled value is inter-preted as explicit null or implicit null.
|
| …topology holddown sigerr
|
0-300 seconds
|
10 seconds
|
When RSVP signalling says that a link is down, this governs how long that link can be disregarded for CSPF purposes.
|
| …tunnels
|
None
|
Off
|
Starts the basic MPLS TE process.
|
